35mm Color Film – Kodak Vision3 500T (1 Roll)

Kodak Vision3 500T 35mm Film – Tungsten(Indoor Light) Balanced – 500iso -DX Coded ISO 400 –1 Roll / 24 exposures / Process: ECN-2*

Our film is purchased fresh and direct from Eastman Kodak USA and hand-rolled by the Film Photography Project. We do not use “re-canned film” or “short ends”. Film is for personal use. Re-sale is prohibited.

*NOTICE:This motion picture film CAN NOT be processed bystandard commercial film labs! Vision3 film has a carbon based “Rem Jet” and can be home developed or developed by one of the recommended labs below. Please read all the information on this page before purchasing this product.

Process at home using theFPP Home Color Kit
or send your film to:

Blue Moon Camera & Machine
Portland, Oregon USA
https://www.bluemooncamera.com
or
OLDSCHOOL PHOTO LAB
New Hampshire USA
https://oldschoolphotolab.com/

Botique Photo Lab
Mt Julliet Tennessee
https://boutiquefilmlab.com/

TERMS:We do not replace or offer refunds on film once purchased. There are so many factors that may create unsatisfactory results – your handling,vintage camera failureor lab/home processing error we cannot be held responsible for the outcome and do not offer replacement rolls or refunds.

Why can’t I process this film at my favorite C-41 lab? –Kodak’s color motion picture films have an additional layer (on the shiny, not the emulsion side) called a “Rem Jet”. Although technically this film can be processed C-41, this Rem Jet will foul commercial lab’s equipment and there for can not be commercially processed. DO NOT BRING THIS FILM to a commercial lab or think you can “slip it through” – it will severely mess up their machines!!!!

What commercial lab will process my negs, scan and or print for me? –See links above.

How do I process this film at home withFPP’s ECN-2 Kit?

In addition to the normal directions for home-processing please add the following step.

After your last step, rinse your film in a half bucket of hot water (80 – 102 degrees F). With your thumb, gently rub the non-emulsion side of your film as you remove it from your film reel. Careful not to scratch the emulsion side of your film. Final rinse under running water. You will see the black rem jet in your water as you rinse.

That’s it! Hang your film to dry and then scan! Enjoy!!!